I have the demo of MultiDynamics and I like it but I just wish to have the stereo linking turn off for all bands.
I suggest you add an option for stereo linking ON/OFF.
I will buy it if I can turn off the stereo linking.
Read this text from http://www.kjaerhusaudio.com and you will understand why stereo linking is not so great sometimes.

Stereo Link :

Stereo linking is used to ensure that both stereo channels are compressed equally. This is
necessary in order to avoid disturbances in the stereo balance in cases where the signal level
in one channel is louder, and therefore is compressed more than the other channel.
Unfortunately, stereo linking also increases the total amount of artifacts produced when
compressing; this is a physical law of stereo linking and therefore applies to all dynamic
processors using conventional stereo linking.

Kjaerhus has solved this problem with a new patent-pending stereo linking system for the
MPL-1. This stereo linking system allows peaks to be compressed unlinked while the effective
level compression is linked. As our ears detect signal levels based on the effective level (RMS)
rather than the peak-level, it is possible to maintain unlinked peak compression without
disturbing the stereo balance as long as the RMS compression remains linked. As it is peak
compression that produces the majority of artifacts, the new stereo linking system alone
reduces artifacts by up to 6 dB compared to the conventional stereo linking method.

Thanks !  :wink: